November 27, 2022
Trending Tags

Crashes: Causes and Complications – NASCAR Talk

Read Time:5 Minute, 54 Second

Two drivers have missed races this year after hard rear-end crashes. Kurt Busch has been out since an incident in qualifying at Pocono in July. Alex Bowman backed hard into a wall at Texas and will miss Sunday’s race at the Charlotte Roval (2 p.m. ET, NBC).

Other drivers have noted that the hits they’ve taken in the Next Gen car are among the hardest they’ve felt in a Cup car.

“When I crashed it (at Auto Club Speedway in practice), I thought the car was destroyed, and it barely backed the bumper off. It just felt like somebody hit you with a hammer,” Kevin Harvick told NBC Sports.

The three most crucial parameters in determining the severity of a crash are:

  • How much kinetic energy the car carries
  • How long the collision takes
  • The angle at which the car hits

Angle

The last of these factors requires trigonometry to explain properly. You can probably intuit, however, that a shallower hit is preferable to a head-on — or rear-on — hit.

A graphic show shallower (low-angle) hits and deeper (high-angle) hits
Click for a larger view

When the angle between the car and the wall is small, most of the driver’s momentum starts and remains in the direction parallel to the wall. The car experiences a small change in velocity.

The larger the angle, the larger the change in perpendicular speed and the more force experienced. NASCAR has noted that more crashes this season have had greater angles than in the past.

Busch and Bowman both had pretty large-angle hits, so we’ll skip the trig.

Energy — in pounds of TNT

A car’s kinetic energy depends on how much it weighs and how fast it’s going. But the relationship between kinetic energy and speed is not linear: It’s quadratic. That means going twice as fast gives you four times more kinetic energy.

The graph shows the kinetic energies of different kinds of race cars at different speeds. To give you an idea of how much energy we’re talking about, I expressed the kinetic energy in terms of equivalent pounds of TNT.

A vertical bar graph showing kinetic energies for different types of racecars and their energies

  • A Next Gen car going 180 mph has the same kinetic energy as is stored in almost three pounds of TNT.
  • Because IndyCars are about half the weight of NASCAR’s Next Gen car, an IndyCar has about half the kinetic energy of a Next Gen car when both travel at the same speed.
  • At 330 mph, Top Fuel drag racers carry the equivalent of six pounds of TNT in kinetic energy.

All of a car’s kinetic energy must be transformed to other types of energy when the car slows or stops. NASCAR states that more crashes are occurring at higher closing speeds, which means more kinetic energy.

Longer collisions > shorter collisions

That seems counterintuitive, doesn’t it? Who wants to be in a crash any longer than necessary?

But the longer a collision takes, the more time there is to transform kinetic energy.

A pitting car starts slowing down well below it reaches its pit box. The car’s kinetic energy is transformed into heat energy (brakes and rotors warming), light energy (glowing rotors), and even sound energy (tires squealing).

The same amount of kinetic energy must be transformed in a collision — but much faster. In addition to heat, light and sound, energy is transformed via the car spinning and parts deforming or breaking. (This video about Michael McDowell’s 2008 Texas qualifying crash goes into more detail.)

The force a collision produces depends on how long the car takes to stop. Compare the force from your seat belt when you slow down at a stop sign to what you feel if you have to suddenly slam on the brakes.

To give you an idea of how fast collisions can be, the initial wall impact in the crash that killed Dale Earnhardt Sr. lasted only eight-hundredths (0.08) of a second.

SAFER barriers use a car’s kinetic energy to move a heavy steel wall and crush pieces of energy-absorbing foam. That extracts energy from the car, plus the barrier extends the collision time.

The disadvantage is that a car with lower kinetic energy won’t move the barrier. Then it’s just like running into a solid wall.

That’s the same problem the Next Gen car seems to have.

Chassis stiffness: A Goldilocks problem

The Next Gen chassis is a five-piece, bolt-together car skeleton, as shown below.

A graphic showing the five parts of the Next Gen chassis.
Graphic courtesy of NASCAR. Click to enlarge.
The foam surrounding the outside of the rear bumper
The purple is energy-absorbing foam. Graphic courtesy of NASCAR. Click for a larger view.

That graphic doesn’t show another important safety feature: the energy absorbing foam that covers the outside of the bumpers. It’s purple in the next diagram.

All cars are designed so that the strongest part of the car surrounds the occupants. Race cars are no different.

The center section of the Next Gen chassis is made from stout steel tubing and sheet metal. Components become progressively weaker as you move away from the cockpit. The bumper, for example, is made of aluminum alloy rather than steel. The goal is transforming all the kinetic energy before it reaches the driver.

Because the Next Gen car issues are with rear impacts, I’ve expanded and highlighted the last two pieces of the chassis.

The rear clip and bumper, with the fuel cell and struts shaded

The bumper and the rear clip don’t break easily enough. The rear ends of Gen-6 cars were much more damaged than the Next Gen car after similar impacts.

If your initial thought is “Just weaken the struts,” you’ve got good instincts. However, there are two challenges.

I highlighted the first one in red: the fuel cell. About the only thing worse than a hard collision is a hard collision and a fire.

The other challenge is that a chassis is a holistic structure: It’s not like each piece does one thing independent of all the other pieces. Changing one element to help soften rear collisions might make other types of collisions harder.

Chassis are so complex that engineers must use finite-element-analysis computer programs to predict their behavior. These programs are analogous to (and just as complicated as) the computational fluid dynamics programs aerodynamicists use.

Progress takes time

An under-discussed complication was noted by John Patalak, managing director of safety engineering for NASCAR. He told NBC Sports’ Dustin Long in July that he was surprised by the rear-end crash stiffness.

The Next Gen car’s crash data looked similar to that from the Gen-6 car, but the data didn’t match the drivers’ experiences. Before addressing the car, his team had to understand the disparity in the two sets of data.

They performed a real-world crash test on a new configuration Wednesday. These tests are complex and expensive: You don’t do them until you’re pretty confident what you’ve changed will make a significant difference.

But even if the test goes exactly as predicted, they aren’t done.

Safety is a moving target.

And always will be.



Source link

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %
Previous post How company off-sites are changing business travel
Next post Alion Science & Technology Corporation